OSHA General Industry Outreach Training
Wright State University, Dayton, Ohio
June 16-17, 2017
The OSHA 10-Hour program is intended to provide a variety of training on General Industry safety and health topics to entry-level and experienced workers. Subjects covered will include: Introduction to OSHA, Electrical Safety, Aerial Work Platforms, Personal Protective Equipment (PPE), Walking and Working Surfaces, Emergency Action Plans, Fire Prevention Plans, Hazard Communication, and Fall Protection. If possible, Local OSHA Consultation Service representatives will lead portions of this workshop, and we will include a tour of a nearby performance facility to help familiarize participants with OSHA inspection procedures.
The lead instructor will be David C. Glowacki, Production Manager & Assistant General Manager of the Performing Arts Center at Kent State-Tuscarawas. He is currently the USITT Safety & Health Commissioner and is the Associate Editor of Safety & Health for TD&T. In 2006, Dave completed USITT-sponsored training to become an OSHA Authorized Outreach Trainer, a credential he successfully renewed in 2010 and again in 2014. In 2008 he became a licensed Aerial Work Platform Safety instructor. Dave is a regular presenter at USITT National and Regional events, and is serving on the Board of USITT-OVS as a Member-At-Large.
|12:00p-2:00p||Workshop (2.0 hrs) Introduction to OSHA|
|2:15p- 3:15p||Workshop (1.0 hrs) Walking & Working Surfaces / Fall Protection|
|3:15p-3:45p||Workshop (0.5 hrs) Noise & Hearing Conservation|
|4:00p-4:30p||Workshop (0.5 hrs) Aerial Work Platforms|
|4:30p-5:30p||Optional (1.0 hrs) Venue Tour/Mock Inspection or Q&A w/OSHA Representative|
Optional trip: Circus 1903. Ticket prices between $30 – 87.50 depending on availability.
|9:00a-11:00a||Workshop (2.0 hrs) Exit Routes, Emergency Action Plans, Fire Prevention Plans and Fire Protection / Safety & Health Program|
|11:15a-12:15p||Workshop (1.0 hrs) Hazard Communication|
|12:15p- 1:15p||Workshop (1.0 hrs) Personal Protective Equipment|
|2:15p-3:15p||Workshop (1.0 hrs) Materials Handling / Lockout/ Tagout|
|3:15p-4:15p||Workshop (1.0 hrs) Electrical Safety|
|4:15p-4:30p||Wrap-Up / Final Questions / Dismissal|
2-Day Workshop Cost
USITT - Ohio Valley Section members: $50
Not sure if you're a member? Contact Kim to check your status.
Register Today, via Google