Jump to main navigationJump to page content

Splitters and Interfaces for Rent

 VLS - Photo Coming Soon

DMX A/B Switch

DMX A/B switches provide a reliable way to switch between control signal sources. Use the DFD DMX A/B switch to activate control from a back up console, or to switch over to a console being operated in tandem for complex concert and musical productions. 1-Week 75.00
2-Week 125.00
4-Week 175.00
Request Details/Quote

 

 VLS - Photo Coming Soon

DMX Relay

DMX relays allow designers to trigger a wide variety of devices via DMX, even if that device does not inherently include DMX capability. The DMX Relay responds to a threshold DMX level on its addressed channel number by turning power on or off to a receptacle on the rear of the unit. DMX relays are an excellent way to control on stage practicals, fans, curtain strobes and other devices where on/off control is necessary. 1-Week 75.00
2-Week 125.00
4-Week 175.00
Request Details/Quote

 

 VLS - Photo Coming Soon

Dove MTX-DE (AMX, DMX)

Dove Systems' MTX-DE converts DMX control signals to analog for older dimmer systems. Add the MTX-DE converter when you need to translate DMX to AMX  protocol. 1-Week 50.00
2-Week 83.00
4-Week 116.00
Request Details/Quote

 

 VLS - Photo Coming Soon

Fleenor 2-2-1 Combine Units

Doug Fleenor Designs' 2-2-1 Combine unit allows for two consoles or other DMX generating controllers to control the same lighting system. The 221 Combine is a great way to add an "always on" back up console to your system, and allows for house controls, backstage controls and other auxilliary signal sources to access the lighting system. DFD Combine units can also translate to and from CMX/ D192 Colortran protocol. 1-Week 75.00
2-Week 125.00
4-Week 175.00
Request Details/Quote

 

 VLS - Photo Coming Soon

Gray Interface (AMX, DMX)

The Gray Interface converts DMX control signals to analog for older dimmer systems. Add the Gray Interface converter when you need to translate DMX to AMX  protocol. 1-Week 50.00
2-Week 83.00
4-Week 116.00
Request Details/Quote

 

 VLS - Photo Coming Soon

Gray Ultimate (AMX, DMX, CMX, ECMUX)

The Gray Ultimate Converter translates between multiple control protocols. Decode DMX control signals to analog for older dimmer systems, or convert the output of an AMX console to DMX for modern dimmers, moving lights, or LED lighting. The Ultimate Converter's front panel controls allow you to select multiple incoming and outgoing protocols with options for speed and version. In addition to AMX/DMX Ultimate converter supports most multiplexing protocols including K96 / K100, CMX & D192, ECMux, Strand D54 and Microplex 1 &2 as used by NSI, Leprecon and Lightronics. 1-Week 75.00
2-Week 125.00
4-Week 175.00
Request Details/Quote

 

 VLS - Photo Coming Soon

Opto Isolator Splitter - 11 way

Opto Isolator Splitters extend the reach of your DMX system and electrically isolate fixtures, consoles and other devices so that a short or failure will not halt the entire system. Splitters are a simple way to distribute DMX to LED lights, color scrollers, or remote dimmers which may located too far away to justify long "over-and-back" daisychains. The 11 Way Opto-Isolator Splitter has one DMX input and 11 DMX outputs to create spurs to additional devices. 1-Week 75.00
2-Week 125.00
4-Week 175.00
Request Details/Quote

 

 VLS - Photo Coming Soon

Opto Isolator Splitter - 2 way

Opto Isolator Splitters extend the reach of your DMX system and electrically isolate fixtures, consoles and other devices so that a short or failure will not halt the entire system. Splitters are a simple way to distribute DMX to LED lights, color scrollers, or remote dimmers which may located too far away to justify long "over-and-back" daisychains. The 2 Way Opto-Isolator Splitter has one DMX input and 2 DMX outputs to create spurs to additional devices. 1-Week 25.00
2-Week 41.50
4-Week 58.00
Request Details/Quote

 

 VLS - Photo Coming Soon

Opto Isolator Splitter - 5 way

Opto Isolator Splitters extend the reach of your DMX system and electrically isolate fixtures, consoles and other devices so that a short or failure will not halt the entire system. Splitters are a simple way to distribute DMX to LED lights, color scrollers, or remote dimmers which may located too far away to justify long "over-and-back" daisychains. The 5 Way Opto-Isolator Splitter has one DMX input and 5 DMX outputs to create spurs to additional devices. 1-Week 50.00
2-Week 83.00
4-Week 116.00
Request Details/Quote

 

 VLS - Photo Coming Soon

Wireless DMX Receiver

Make any DMX dimmer, luminaire, or other lighting instrument wireless. You will need a DMX cable from the receiver to the fixture, but you won't need to run long cables back to the control source. Wireless DMX Receivers are a simple way to distribute DMX control to remote locations, on stage practicals, and hard to reach hanging positions. 1-Week 100.00
2-Week 165.00
4-Week 233.00
Request Details/Quote

 

 VLS - Photo Coming Soon

Wireless DMX Transmitter

Transmitting a full universe of DMX, our Wireless DMX Transmitter saves time and money. A single transmitter can be connected to your lighting console and will broadcast DMX to multiple receivers. If you’d prefer not to spend time uncoiling and running cable, add a Wireless DMX transmitter to your next rental package, it's a great way to distribute DMX to hard to reach locations, or for onstage practicals where a traditional DMX cable would be unsightly. 1-Week 150.00
2-Week 250.00
4-Week 350.00
Request Details/Quote